Unico WON0502-C Electric Furnace, 5kW, 1P/230V
0 opinions
$635.16
$948.00
Category:Electric Furnace
Manufacturer:Unico
Product code:WON0502-C
Product available
Unico WON0502-C Electric Furnace, 5kW, 1P/230V
$635.16
$948.00
General specs
- Product codeWON0502-C
- ManufacturerUnico
- SKU
Dimensions
- Dimensions16.00in x 20.00in x 29.00in
- Weight22.00lb
Technical Specifications
- Air Handler Compatibility All sizes
- Min Air Flow 250 (0.12) CFM (m3 /s)
- Weight 22 lbs
- Height 29"
- Nominal Capacity 17,060 Btu/hr (5.0 kW)
- Width 20"
- Depth 16"
- Power Supply 230/1/60
- Brand Unico
- Certifications ETL
Unico WON0502-C Electric Furnace, 5kW, 1P/230V
Description:
- This electric furnace module can be attached directly to one of our blower units or it can be installed in the supply air duct downstream from the blower unit as a duct heater.
- This model is rated for 5kw at 240 volts single phase.
- The heater contains 1 circuit breaker as a disconnect and one 15 amp breaker to power the blower unit.
- There are multiple safety's built in such as a pressure air proving switch, fan relay switch, auto temperature limit and fuse links.
- The heater comes with a 10" round start collar and a 11.5" square start collar.
General Features:
- NEW (Revision C) – more efficient DC contactors
- NEW (Revision C) – full disconnection when off
- Galvanized insulated sheet metal cabinet enclosure
- Can be converted to a duct heater
- Magnetic de-energizing contactors for each element
- Line level auto limit primary safety set @ 165 °F (74 °C)
- Line level fuse link back-up safety
- Fan interlock control, fan signal proving switch
- Low air flow pressure switch
- Circuit breakers on all units
- Time delay sequencers for a gradual “stepped” power draw (softer start)
- Low voltage terminal strip (24 volt control)
- Specially designed tight cabinet for small duct, high velocity systems
- Single Supply (all units) or dual supply (15 and 20kW)
Unico 2-2.5 Ton (M2430) System Bundle - Heat and Cool (Heat Pump)
Purchased with this product
