ICM Controls ICM495-30A-F 30 Amp Fused Disconnect with Internal Surge Protection
$93.55
Product code:ICM495-30A-F
Product available
ICM Controls ICM495-30A-F 30 Amp Fused Disconnect with Internal Surge Protection
$93.55
General specs
- Product codeICM495-30A-F
- ManufacturerICM Controls
- SKUICM495-30A-F
Dimensions
- Dimensions9.00in x 5.00in x 2.00in
- Weight0.00lb
Technical Specifications
- Diagnostics Green LED indicates surge protection present
- Electrical Voltage Split phase 240 VAC - 50/60Hz
- Enclosure NEMA Type 3R metal enclosure for outdoor and indoor installation
- FLA 30A/60A (depending on model)
- Locked Rotor Amperes (LRA) 360A
- Mounting Four mounting holes in back of enclosure
- Nominal discharge current 20kA
- Protection mode L1-L2, L1-N, L2-N
- Short Circuit Current Rating (SCCR) 10kA
- SPD type Type 2
- Surge protection technology TFMOV
- Height 2.50”
- Width 5.25”
- Depth 9”
ICM Controls ICM495-30A-F 30 Amp Fused Disconnect with Internal Surge Protection
Description:
- The ICM495 is a UL Listed Electrical Disconnect with an Internal Surge Protective Device built-in.
- The ICM495 is available in two models 30A Fused and 60A Non Fused.
- The included field replaceable Type 2 SPD is intended for 240 VAC Split Phase configurations.
- When a surge occurs, the ICM495 will absorb the surge up to the limits expressed in the specifications section in this guide.
- The ICM495 incorporates thermal protection on the surge elements (TMOV’s) which allows for safe disabling of the surge elements when a surge exceeds the thermal limits of the device.
- The ICM495 has a status light on the control which identifies operational status when illuminated.
- The ICM495 can be installed as a Type 2 device for both indoor and outdoor applications.
- Suitable for use on a circuit capable of delivering not more than 10kA RMS symmetrical amperes, 240V maximum.
General Features:
- UL Listed Electrical Disconnect including both enclosure & surge protector
- 120VAC single-phase, 240VAC split-phase
- Features an internal field replaceable surge protective device (SPD)
- Maximum Surge Current Rating of 100kA
- Highest UL rating for nominal discharge current (In 20kA), for increased longevity & durability of the SPD
- Constructed with 2 high-quality thermally protected MOV’s (TFMOV)
- Completely factory wired for quick and easy installation
- NEMA type 3R rated powder coated metal enclosure for indoor/outdoor use
- Fully accessible mounting holes, no dissembling required
- Braided strap thoroughly grounding both the enclosure and cover
- LED indicator light showing when Surge Protection is operational
- 30A Fused & 60A non-fused models available
- Made in the USA
Replaces:
- All standard disconnect boxes rated for equal voltage and current configurations
- MARS - 83916
- RectorSeal - RSH-50 96417
